Troubleshooting Tips for a Jeep Renegade That Won’t Start with a Locked Brake Pedal

Text Only 02


Is your Jeep Renegade refusing to start, and you’re experiencing a locked brake pedal? This can be a frustrating situation, but don’t worry! We’ve compiled a list of eight potential solutions to help you troubleshoot and resolve the issue. By following these steps, you can hopefully get your Jeep Renegade back on the road in no time.

1. Check the Battery

The first thing to do when your Jeep Renegade won’t start is to check the battery. Ensure that the battery connections are clean and secure. If the battery is old or weak, it may not have enough power to start the engine. Consider getting the battery tested or replaced if necessary.

2. Inspect the Brake Pedal

Examine the brake pedal closely to see if there are any obstructions or debris preventing it from functioning properly. Sometimes, objects can get stuck under the pedal, causing it to feel locked. Remove any foreign objects and try starting the vehicle again.

3. Check the Brake Light Switch

The brake light switch is responsible for sending a signal to the vehicle’s computer to allow the engine to start. If the switch is faulty or misaligned, it may prevent the engine from starting. Inspect the switch and ensure it is functioning correctly. If necessary, consult a professional for a replacement.

4. Examine the Ignition Switch

The ignition switch is another component that can cause starting issues. If the ignition switch is faulty, it may not send the necessary signals to start the engine. Check the ignition switch and consider having it inspected or replaced by a qualified mechanic if needed.

5. Test the Starter Motor

The starter motor is responsible for initiating the engine’s combustion process. If the starter motor is malfunctioning, it may prevent the engine from starting. Consider testing the starter motor or seeking professional assistance to diagnose and repair any issues.

6. Check the Fuel System

Ensure that your Jeep Renegade has an adequate fuel supply. If the fuel tank is empty or the fuel pump is not functioning correctly, the engine may not start. Check the fuel level and listen for any unusual noises from the fuel pump. If necessary, consult a mechanic for further inspection and repairs.

7. Inspect the Security System

Some Jeep Renegade models have a security system that can prevent the engine from starting if it detects unauthorized access or tampering. Check if the security system is armed and try disarming it using the proper procedure outlined in your vehicle’s manual.

8. Seek Professional Assistance

If you’ve tried the above solutions and your Jeep Renegade still won’t start with a locked brake pedal, it may be time to seek professional assistance. A qualified mechanic will have the necessary expertise and tools to diagnose and repair any complex issues that may be causing the problem.


Experiencing a Jeep Renegade that won’t start with a locked brake pedal can be frustrating, but by following these troubleshooting tips, you can hopefully identify and resolve the issue. Remember to always prioritize safety and consult a professional if you’re unsure or unable to diagnose and fix the problem yourself. With proper attention and care, you’ll soon have your Jeep Renegade back on the road and running smoothly once again.

About the Author